If you are considering having a mobile home built, you may be wondering how much weight the walls can hold. After all, you don’t want them to buckle under the weight of your belongings!
In this blog post, we will take a look at how much weight a mobile home wall can hold and what factors affect it.
We will also provide some tips on how to strengthen your walls. Keep reading to learn more!
Related Article: How Much Does A Mobile Home Frame Weigh?
Mobile Home Walls Weight Holding Capacity
Mobile home walls can only hold so much weight. Depending on the type of wall your mobile home has, it may have a lower capacity than you realize.
Single skin construction refers to a mobile home with a single layer of exterior panelling attached directly to the frame. This is not as strong as a double-layer wall with studs in between, but can still hold quite a bit of weight.
The maximum amount of weight that the wall should be able to hold varies depending on its height and width:
Height: up to 8 feet = 100 pounds per square foot
Width: up to 10 feet = 70 pounds per square foot
It’s important to make sure your appliances and furniture do not exceed these weight limits, as doing so could cause the wall to buckle.
Factors that affect a mobile home wall’s weight capacity
Several factors can affect a mobile home wall’s weight capacity, including:
- The type of wall: single skin or double layer
- The height of the wall
- The width of the wall
- The amount and weight of the belongings on the other side of the wall
How to strengthen your mobile home walls?
If you are concerned about your mobile home walls’ weight capacity, there are several things you can do to strengthen them.
- Add insulation: This will help to keep your belongings from putting too much strain on the walls.
- Use plywood rather than drywall: Plywood is thicker and stronger, so it can support more weight.
- Strengthen your appliances: Appliances that are on the thinner side may be better replaced with ones that are heavier duty.
For example, replace a regular kitchen faucet with one that has a higher water pressure rating to help ensure it doesn’t buckle under the weight of the water coming through it.
If you feel like your mobile home walls cannot hold all of your belongings, talk to an experienced contractor about what else you can do to make sure they don’t buckle under the strain.
You will need to know how much weight they can handle to prevent any accidents from happening!
FAQs about MH Walls Weight Capacity
Can a mobile home wall hold a TV?
A TV is typically around 40 pounds. If you’re not sure how much weight your mobile home wall can hold, it’s important to make sure that the TV is properly bolted down and does not exceed the weight limits of the walls.
In many cases, a lighter TV will be cheaper than a heavier one because the materials used to make it are less expensive.
This makes it easier to find one that fits within what your wall can support comfortably without adding too much stress. Keep this in mind as you shop!
How do you hang something heavy in a mobile home?
This depends on where it is being hung. For example, you could have a mobile home wall that supports the weight of your TV just fine but is not designed to support extra heavy objects. In this case, you would need to find an alternate place to hang it.
To avoid putting too much weight pressure on the walls and causing them to buckle, make sure your appliances and furniture do not exceed what they can hold.
Do mobile homes have weight bearing walls?
A mobile home weight bearing wall supports the weight of the roof and other upper floors.
Most mobile homes do not have these, as they are not typically necessary. However, if your mobile home has a second story, it will need at least one weight bearing wall to support it.
If you are unsure whether or not your mobile home has weight bearing walls, it’s important to consult with an experienced contractor. They will be able to tell you what needs to be done to make sure your home is safe!
Also Read: Can You Walk On A Mobile Home Roof?
Can I put shelves on my mobile home walls?
This depends on the type of wall that your mobile home has. If it is a single skin wall, adding shelves may put too much stress on it and cause it to buckle.
Even if your mobile home has a double skin wall, you may want to take into consideration what you will be putting on the shelves before adding them.
Closing Remarks
The weight capacity of a mobile home wall depends on the type you have. For example, if your walls are made with aluminum or steel panels, they can hold up to about 2 tons without buckling.
If your walls are wooden studs and plywood sheets, then it’s recommended that you don’t exceed around 800 pounds per linear foot (2 inches) in height before there could be trouble with shifting or sagging.