Are you in the market for a mobile home? If so, have you thought about running electrical wire underneath it? This is a great way to provide power to your new home, and it’s not as difficult as you may think.
In this post, we’ll discuss the process of running electrical wire under a mobile home and offer some tips to make things go more smoothly.
So, whether you’re just starting to look at mobile homes or are already in the process of buying one, be sure to read on!
5 Steps to running electrical wire under a mobile home
1- The first step is to determine where you want to run the wire. This may depend on the layout of your mobile home, where your electrical outlets are located, or simply your personal preferences.
2- Once you’ve decided on a location, use a shovel or post hole digger to create a trench that’s at least six inches deep. If the ground is particularly rocky or hard, you may need to go down a few feet.
3- Once the trench is ready, it’s time to run the wire. If you’re not comfortable doing this yourself, be sure to hire a professional electrician.
4- The wire should be placed in the trench so that it’s slightly below the surface; this will make it easier to lay down concrete or asphalt later.
After that, all you need to do is cover up the wire with dirt and repeat the process for each area where you want to power.
5- If you’re having difficulty finding a place to run your electrical wires, an alternative option is using surface wiring.
This simply involves running the electrical wire along the outside of your mobile home and plugging everything into an electric box.
This allows you to control where and how much electricity goes out, but if something happens to the wiring it will be pretty obvious. For example, there’s a clear pathway where water can trickle down and damage any problematic joints or connections.
Therefore, this option is only recommended for those who are willing to take on some added responsibility so that they can have more control over their system.
It isn’t as easy as running wire underneath the house, but it could save you money in the long term!
Things to Consider Before Running Electric Wire Under a Mobile Home
Now that we’ve gone over a few things to consider when running electrical wire under a mobile home, let’s take a look at some of the benefits this option has to offer.
One big benefit is that it’s often more affordable than traditional wiring. This is because you’re not paying for someone else to do the work; you can simply do it yourself with a little bit of time and effort.
Additionally, it can be a lot easier to add outlets and switches when you have wires already running underneath your house.
This may come in handy down the road if you decide to make any changes or additions to your electrical system.
Finally, by running your wire you’ll have peace of mind knowing that everything has been installed correctly and meets all safety guidelines.
So if you’re thinking about installing a new electrical system in your mobile home, be sure to consider running wire underneath the house!
If you have any other questions or concerns, feel free to ask us in the comments section below. We’ll do our best to reply ASAP!
Hiring professional help could save you money in the long run.
Electrician services are usually very affordable. You can hire a qualified electrician that will different service packages at rates that are very reasonable.
Surface wiring is a great option for those who are willing to take on some added responsibility. If you’re still thinking about surface wiring might be a good option for your situation, learn more here.
Can you run Romex under a mobile home?
No, because Romex isn’t meant for in-ground installation. But you can run it inside the mobile home under an eve but never in direct contact with water, gas or oil.
It is not allowed because it would require running electrical wires outside your house and then back into the house which is labor intensive and potentially hazardous if not done correctly.
The National Electrical Code forbids installation of wiring beneath a manufactured structure unless the structure is to be permanently located at its site.
Many states have additional rules against this type of installation so there’s no way I’d recommend this method even though it might save you money upfront.
You should hire professionals to do this kind of work since there are safety concerns involved with handling electricity.
Related Article: Do RV Batteries Charge When Plugged Into Shore Power?
Also, consult with your homeowner’s insurance company to see if they’ll give you a discount on your rates for having a professional electrical contractor do the work.
The best way to save money on an electrical installation is by doing it yourself. You should research the job and make sure you understand what needs to be done before starting. Be very careful when working with electricity!
When you need to run electrical wires, the wires must be insulated. If you don’t want to use copper or aluminum wiring for this process, PVC is a great option.
It has excellent insulation capabilities and will not corrode over time as metal would.
This makes it an ideal choice when running electricity under mobile homes because there’s always worry about corrosion damaging your home’s foundation eventually down the road.
There are some things you need to consider before doing this.
You’ll want to make sure the electrical wire is grounded, which means it will be in contact with the earth at all times and not just when there’s a power surge or lightning strike.
And if your home has an underground plumbing system then you’re likely already using PVC pipes that won’t work for wiring because they cannot carry electricity!
All of these factors can contribute to safety concerns so take time to research what type of wires should be used under mobile homes.
Let us know if we can help with any of your electrical needs!